Bituminous Membrane Waterproofing
Torch-applied APP/SBS membranes for foundations, basements and protected roofs.
View service
Services
Water always finds the weakest detail. We choose the system for your substrate and exposure, then flood-test it.
Trusted across the UAE since 2006 · Dubai & all 7 Emirates
Overview
ESA Technical Services LLC is a Dubai-based technical services company, established in 2006, specialising in GRP works, waterproofing, insulation and installation across the UAE. As waterproofing contractors in Dubai, we protect roofs, podiums, balconies, basements, foundations, wet areas, swimming pools and water tanks.
Waterproofing is a continuous barrier that stops water passing into or through a structure. In the UAE it faces extra stress: roof surfaces far hotter than the air, strong UV, daily thermal movement and, near the coast, a high water table pushing against basements. The best system for a shaded basement is rarely the best for an exposed villa roof.
We install six systems and recommend the one that fits the job. That includes industrial waterproofing in Dubai for plant rooms, warehouses, trenches, bunds and process areas, where chemical resistance and traffic matter as much as keeping water out.
Our waterproofing
Each system has strengths. See the full comparison below.
Torch-applied APP/SBS membranes for foundations, basements and protected roofs.
View serviceHot or cold-applied bitumen coatings for below-grade concrete and retaining walls.
View servicePolymer-modified and crystalline systems for wet areas, tanks, pools and basements.
View serviceSeamless, elastic polyurethane membranes with UV-stable top coats for exposed roofs.
View serviceA layered roof build (waterproofing, insulation, protection, finish) for heat and leaks.
View serviceElastomeric, reflective acrylic coatings for cool roofs and cost-effective refurbishment.
View serviceCompare
Typical characteristics for UAE conditions. The right choice depends on the substrate, exposure, traffic and what goes on top.
| System | Best for | Flexibility | UV resistance | Exposed / concealed | Foot traffic | Relative cost |
|---|---|---|---|---|---|---|
| Bituminous membrane | Foundations, basements, roofs under screed | Good (SBS very good) | Low unless mineral-faced or protected | Mostly concealed | Under protection | Medium |
| Bituminous coating | Below-grade concrete, retaining walls | Moderate | Poor | Concealed only | No | Low |
| Cementitious | Wet areas, tanks, pools, basements | Rigid to semi-flexible | Good (under finishes) | Concealed under tiles/screed | Under finishes | Low–Medium |
| Liquid PU membrane | Exposed roofs, podiums, balconies, details | Excellent | Good with UV top coat | Exposed or concealed | Yes (traffic grades) | Medium–High |
| Combo roof system | Roofs needing waterproofing + insulation | System-dependent | Excellent (protected layers) | Concealed under finish | Yes (tiles/screed) | High |
| Acrylic coating | Roof refurbishment, reflective cool roofs | Good (elastomeric) | Good | Exposed | Light only | Low |
Performance depends on the specified system, substrate, exposure and manufacturer requirements. Your quotation names the exact system and thickness for your project.
Industrial sites add chemicals, oils, hot water, heavy traffic and cleaning regimes. For plant rooms, trenches, bunds, pump rooms and process areas we combine the right waterproofing layer with chemical-resistant finishes where needed. These include polyurethane, cementitious or GRP linings, depending on the exposure.
Industries we serve
From a single villa roof to industrial plant rooms and basements.
FAQ
It depends on the surface (concrete, screed, metal, existing membrane), exposure (sun, foot traffic, groundwater) and what goes on top. We inspect, test the substrate and recommend a system in writing, with alternatives if you want to compare cost and life.
Sometimes. If the existing layer is well bonded and compatible, overlaying with PU or acrylic can save cost and time. If it's blistered, debonded or holding water, it must be removed. We confirm this on site with adhesion checks.
Yes. Flat roofs, podiums and wet areas are flood-tested, typically for 24–48 hours, before protection layers or tiles are installed, and the result is recorded.
Yes. We waterproof industrial roofs, plant rooms, trenches, bunds, pump rooms and water-retaining structures across the UAE, selecting systems for chemical exposure and traffic as well as water.
More answers on our FAQ page.
Free site inspection & quotation
Get a site inspection from waterproofing specialists who test every job. The inspection and quotation are free.